CHECK COMPARE PRICES for BEST BUY and GET SPECIAL DISCOUNT!!! ABOUT Cisco-Linksys WVC54GC Wireless-G Internet Video Camera
MAKE VIDEOS SAVE SHOP ONLINE SALES...
Cisco-Linksys WVC54GC Wireless-G Internet Video Camera : MAKE VIDEOS
Check Available at Here !!! Check Price Now!
Model Of Item : WVC54GC |
|||||||||
|
|||||||||
Cisco-Linksys WVC54GC Wireless-G Internet Video Camera
MAKE VIDEOS
cheapest online discount...
The Linksys Compact Wireless-G Internet Video Camera sends live video through the Internet to a web browser anywhere in the world This compact, self-contained unit lets you keep track of your home, your kids, your workplace -- whatevers important to you. Unlike standard web cams that require an attached PC, the Internet Video Camera contains its own web server, so it can connect directly to a network, either over Wireless-G (802.11g) networking, or over 10/100 Ethernet cable. The advanced MPEG-4 video compression produces a high-quality, high-framerate, up to 320x240 video stream. The Compact Internet Video Cameras unique form-factor and wireless connectivity allows you to mount it on a wall nearly anywhere, or slip it into its included stand for desktop use..../ Cisco-Linksys WVC54GC Wireless-G Internet Video Camera / MAKE VIDEOS
.../ Cisco-Linksys WVC54GC Wireless-G Internet Video Camera / MAKE VIDEOS
MAKE VIDEOS
Special for
Buy cheapest sale
Customer Review :
Learning Your Mother Falls - Priceless : Cisco-Linksys WVC54GC Wireless-G Internet Video Camera
[EDIT]
Ok, 3 weeks after setting these cameras up, I do have a few negative comments. The cameras will sometimes spontaneously stop working. I haven't been able to figure out why. I'm on the other side of the country from them now so I can't physically see them. Eventually they come back online. All 3 are just sitting there plugged in, in an empty house.
The video is fairly choppy if sound is enabled, even at 320x240.
The lighting plays a huge role in the quality of the image - bright sunlight in a window makes the image almost unusable. The image is very poor in dim lighting as well.
The field of view is pretty narrow and there's nothing you can do about it - I wish there was a wide-angle option.
I wish the interface to the camera was editable, and that you could show multiple cameras on the same page.
Other than that, they cameras basically work as advertised, but I couldn't recommend them for anything other than a novelty because of the image quality concerns and the reliability issues. It's fairly cheap and is good for casual monitoring.
[/EDIT]
I just set up 3 of these for my father-in-law (all the kids gave them to him) in his vacation home. He wants to be able to check on the house when he's not there. They worked fine, as advertised, as long as I was careful and made sure I had the right firmware. This is how I did it, without using the setup CD (which is confusing and was unnecessary for my setup).
If you've got a Linksys router and you haven't messed with the IP ranges like someone else who posted has, it's really easy to do - the most important thing to do is set it up WIRED first! I plugged the included ethernet cable into the router and into the camera. Then I powered on the camera. It booted up and showed 192.168.1.115 or something as the IP address in the little LCD window. I opened up an Internet Explorer window on my PC. Went to http://192.168.1.115. The configuration utility for the camera came up. Clicked on "View Video", installed the ActiveX Control I was prompted for, and up it came - the camera worked. Clicked on "Setup". Default username and password are admin and admin. Under "LAN Settings" I chose "Fixed IP Address", and assigned it the value I wanted. For my 3 cameras, the IP address I chose were 192.168.1.150, 192.168.1.151, 192.168.1.152. Subnet mask was always 255.255.255.0. Gateway, Primary DNS, and Secondary DNS were all always 192.168.1.1 (the router's IP). Tested each of those by opening Internet Explorer and going to the IP address for the camera (i.e. - http://192.168.1.152) and made sure they worked under the fixed IP address.
If you have a non-Linksys router, or have messed with your routers' IP range, it's more complicated. D-Link and Netgear use the 192.168.0.xxx range (0 instead of 1), and I presume to get these working you'll have to plug the ethernet cable from your pc into the camera, use IE to go to the address it shows in the LCD window of the camera. The you should be able to change the IP address of the camera to an acceptable value (like 192.168.0.150) Gateway, Primary DNS, and Secondary DNS would be the router's IP address (i.e. - 192.168.0.1). Then you plug the camera into the router and you should be able to access it through IE on your PC at that new address.
Once I was sure that worked, I set up the wireless settings. Typed in the SSID the router uses, chose Infrastructure, clicked "Enable", and hit "Apply". If you forget to hit Apply it won't take. Then I hit "Edit Security Settings" and in the popup window chose the Default Transmit key from the router, and the key from the router. Kept it on "Open System". Then hit Apply and exit.
Now I unplug the power from the camera. Then unplug the ethernet cable from the camera. Then plug the camera power back in. The lights will flash and the indicator for wireless should come up, along with the IP address I chose. Open up Internet Explorer again, type in the address again (http://192.169.1.152), and it works.
Did this with all 3, then placed them in the house where I wanted them, and tested them again. All worked.
Then I went into their configuration utilities and set up the Email Alert feature. This is the only part that gave me trouble. Basically what I figured out is that the 2 cameras that had Firmware version 2.07 worked fine, and the one that had 2.11 never worked. I downloaded the 2.07 bios at ftp://ftp.linksys.com/pub/network/ (the file is called WVC54G_fw2.07.zip) and flashed the 2.11 camera back to 2.07. Then the email notification worked fine.
Oh and another confusing part was the "Outgoing Mail SMTP Server". Turns out you pretty much have to use your internet provider's mail server, which I was able to find on their website. He uses Charter Cable, and I found out on charter.net that the server is smtp.charter.net. I also just set up a new GMail account specifically for these cameras.
To make it easy to view the cameras from the internet, Linksys included this SoloLink DDNS thing which they charge for. I opted for a free option, and made a new dynamic DNS account at dyndns.org. I set up port forwarding on the router to forward alternate ports (I chose 2000 and 3000 - and set up the cameras "Alternate Port" to these values) to two of the cameras. So now he can get to the three cameras by going to
http://thehostnameichose.dyndns.org
http://thehostnameichose.dyndns.org:2000
http://thehostnameichose.dyndns.org:3000
That's it - works great and I'm happy with them. I give it a 4 because the fact that I had to flash backward to an older bios in order to used an advertised feature is stupid. Other than that, it's great - and no more difficult to set up than most other wireless networking devices. Please Check Update Here!!
bestbuymakevideoscheapshoppp.blogspot.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Best buy cheap about chef hat on sale Best Buy Cubes Storage For Your Home Garden buy about mclane lawn mowers